How to Keep PI Objectives Visible in Jira from Planning to Delivery

TL;DR

Weekly PI Syncs work best when updates are evidence-based, not from anecdotal. When work in Jira is linked to measurable objectives and real-time status is visible, teams see momentum and risks early. Independent research shows that scattered information hides delays and consumes budget; evidence closes that gap.

Easy Agile Programs brings this into Jira. Teams create objectives, link every scheduled issue, and see concise progress bars and value scoring that make the impact clear. The result is faster, confident decisions, fewer update-chasing meetings, and customers see outcomes sooner.

Why tracking progress in Jira beats assumptions

It’s the first weekly PI Sync, and every team lead shares a confident “In Progress” update. By the second sync, a hidden dependency has derailed two of the teams, and leadership wonders how the story changed so quickly. Sound familiar? 

PI Syncs work best when updates are anchored in evidence. When each team links issues to clear objectives and shares progress tracked where the work lives in Jira, leaders see momentum and emerging risks early. The conversation can focus on decisions rather than debate.

Research shows the cost of scattered information is real. Atlassian’s 2025 State of Teams reports that leaders and teams waste 25% of their time searching for information, a symptom of poor reporting and fragmented data. When information is hard to find, decisions are slow, and delivery dates slip.

When you connect work to measurable objectives, make real-time status visible, and map dependencies across the PI, you provide everyone with the picture they need to see the logical next step. 

The Cost of Hidden Delays

In PMI’s 2020 Pulse of the Profession, organisations wasted 11.4 cents of every project dollar through poor performance. That’s real budget lost because problems stayed hidden until it was too late. 

Fast forward to 2023, and Harvard Business Review found that while 89 percent of large companies have a digital or AI transformation underway, they’ve captured only 31 percent of the revenue lift they expected, largely because they can’t verify progress against the outcomes they promised.

The Standish Group paints an even starker picture: just 16 percent of IT projects finish on time, on budget, and on scope. The rest overspend, under‑deliver, or stall altogether. 

Getting it wrong is expensive. 

Data Beats Guesswork

Intuition absolutely has a place in innovation, but there are much better barometers for risk. Teams that look beyond the ship date and measure success in terms of business value and strategic alignment, as well as customer impact and quality, deliver much better results. PMI’s 2025 research shows teams with high “business acumen” (i.e., robust performance measurement) meet their business goals 83 percent of the time and fail only 8 percent of the time.

Simply put, when you can point to objective data, you make better decisions earlier and improve your chances of maintaining momentum.

Three Capabilities for Reliable Tracking in Jira

To reliably track work and progress on objectives across multiple teams, you need to be able to see those objectives, their status, and their dependencies clearly.

1. Link every task to a clear goal
   When work connects directly to objectives, teams know why a story matters and leaders can see which goals risk slipping. Tools like Easy Agile Programs let you create tangible objectives inside Jira and link every issue to them. This is the foundation for tracking delivery progress in Jira across teams.
2. Surface real‑time health signals
   Use status pills, dependency maps, and filterable views to expose blockers as they emerge, not as they bite. When teams can spot problems early, they can rearrange sequencing to support each other and keep delivery moving. This is Jira progress tracking designed for teams of teams.
3. Maintain one source of truth
   When progress lives where the work lives, everyone sees the same numbers. No tool‑switching or chasing status updates. Shared context cuts through noise and lets leaders focus support where it counts. 

Plans Built for Shipping, Not Shelving

Easy Agile Programs embeds the capabilities you need to reliably track progress towards delivery. Objectives are visible, linked work is clear, dependencies are transparent, and status is current. That means teams can adjust early, before roadblocks cause delays.

Track progress on objectives with clarity

Objectives sit at the top of each increment with a concise progress bar that shows the percent complete and remaining work. Every scheduled Jira issue can be linked to an objective, so effort maps directly to outcomes. Product owners can add business-value scores to focus time where it matters most. The Objectives view and the Objectives Report provide a consolidated read on progress, grounded in Jira data rather than slide decks.

Map dependencies and blockers early

Open the Dependencies view or report to see relationships across teams. Visual links highlight upstream and downstream connections and flag items at risk. Select any link to open details such as owner, due date, and next steps, so teams can act before a small issue puts pressure on the schedule. You can also filter the Program Board by objective to see the contributing epics and stories, plus any dependencies that could affect them.

Teams replace anecdotal updates with evidence they can show stakeholders. Leaders can avoid reactive firefighting to focus on coaching and delivery. Most importantly, customers feel the value sooner because plans that are aligned with objectives deliver outcomes that make a real difference.

Try It: Turn Progress into Proof

Easy Agile Programs installs in minutes, and with our easy setup guide, you can create a digital program board for your teams in Jira with minimal overhead. You can test the full functionality yourself with a free 30-day evaluation period, and once you've given your teams the clear picture of progress they need in Jira, you'll see anecdotal updates transform into evidence-based progress.

You may be just starting out, or you may have worked with agile methodologies for a while, but we’re sure you can agree that scaling agile in a large organization can be daunting. PI Planning is key to scaling agile, so we’ve developed this guide, along with a practical checklist, to help you run successful planning sessions, and build your confidence for your next scaled planning event.

You'll find the free checklist at the end of this guide.

This guide covers everything from basic concepts to advanced implementation strategies. We'll walk through the essential elements of successful PI Planning, including preparation steps, participant roles, agenda structure, and best practices for both co-located and remote teams. You'll learn how to navigate common challenges, leverage tools like Jira effectively, and ensure your PI Planning sessions deliver maximum value for your organization.

Let’s start with the basics.

What is PI Planning?

PI Planning stands for Program Increment Planning.

PI Planning sessions are regularly scheduled events where teams within the same Agile Release Train (ART) meet to align and agree on what comes next. Teams will aim to align on goals and priorities, discuss features, plan the roadmap, and identify cross-team dependencies.

The goal is to align the teams to the mission and each other. Here are the essential elements of PI Planning:

• 2 full day events run every 8-12 weeks (depending on the length of your increments)
• Product Managers work to prioritize the planned features for the increment beforehand
• Development teams own user story planning and estimation
• Engineers and UX teams work to validate the planning

Why do PI Planning?

PI Planning is incredibly beneficial for large-scale agile organizations. PI Planning enables:

• Communication
• Visibility
• Collaboration

To understand the impact, let’s look at an example of a large organization that hasn’t yet implemented PI Planning. This organization has 250 teams and 6,500 team members. These teams rarely speak to each other, outside of dealing with a critical issue that has forced them to collaborate.

Alignment across these teams happens at the leadership team level, and they have multiple levels of managers in between who cascade information down with varying success. There is a constant battle for resources, budget, and opportunities to work on the most exciting projects.

Their projects have a habit of conflicting - one team would release something and then it would break something in another team’s project.

PI Planning is the first time many big companies get their teams together in a room or on the same call to talk to each other. This is a chance to have important conversations about who is working on what.

Why is this important?

1. When you’re touching a system or a code repository, you need to know how it’s going to impact another team
2. You might need to do some work to enable another team to work on their feature first (and vice versa)

With proper planning and collaboration, teams can get things done more effectively, release with more predictability, and stay on budget.

Business benefits of PI Planning

While we've covered the basic reasons for doing PI Planning, let's dive deeper into the specific business benefits that organizations gain from effective PI Planning implementation:

Improved resource utilization

• PI Planning provides a clear view of team capacity and capabilities across the entire Agile Release Train
• Organizations can optimize resource allocation by identifying and addressing skill gaps early
• Teams can better balance workload across iterations and avoid overcommitment
• Cross-team dependencies are identified upfront, preventing resource conflicts
• Shared resources can be scheduled more effectively across multiple teams

Enhanced risk management

• Early identification of potential risks through collaborative planning sessions
• Creation of a comprehensive risk board during PI Planning helps track and monitor potential issues
• Teams can develop mitigation strategies before problems impact delivery
• Dependencies between teams are mapped and managed proactively
• Regular risk reviews during the PI ensure ongoing monitoring and adjustment

Strategic alignment and decision-making

• Business context presentation ensures all teams understand organizational goals
• Product/solution vision sessions align teams with customer needs and market direction
• Management review and problem-solving sessions enable informed decision-making
• Teams can make better trade-off decisions with a clear view of priorities
• Value streams are visualized and optimized across the organization

Measurable business outcomes

• Improved predictability in delivery through structured planning
• Better customer satisfaction through aligned feature delivery
• Reduced waste and redundancy in development efforts
• Increased speed to market for new features and products
• More effective use of organizational resources and budgets

One source of truth

• PI Planning creates a shared understanding across all teams
• Visualization capabilities help teams see the big picture
• All stakeholders work from the same roadmap and priorities
• Dependencies and commitments are clearly documented
• Progress can be tracked consistently across teams

By implementing effective PI Planning, organizations can realize these benefits while creating a more collaborative and efficient development environment. Regular iteration meetings and ceremonies help maintain this alignment throughout the Program Increment, while quarterly steering ensures ongoing strategic alignment.

All very good reasons to do PI Planning.

What is the goal of PI Planning?

PI Planning is an essential part of the Scaled Agile Framework, a framework that’s designed to bring agile to large companies with multiple teams.

SAFe PI Planning helps teams in the Agile Release Train (ART) synchronize, collaborate, and align on workflows, objectives, releases, and more.

Without PI Planning, teams don’t have structured communication. They may not know what the other teams are working on, which can cause a lot of problems. For example, two teams might be working on different features without realizing there’s a dependency, which could hold up the release or require a significant rework of the code.

The goal of PI Planning is to have all your teams aligned strategically and enable cross-team collaboration to avoid these potential problems.

Now that we’ve covered off the “why”, let’s dig a bit deeper into the “what”. The best way to get a picture of what happens during PI Planning is to take a look at an agenda.

What is a program?

A program is where agile teams are grouped together to form a larger group. This is often referred to as the “team-of-teams” level. In simple terms, a program is a group of agile teams.

When you hear people talking about “team-of-teams” or “scaled agile”, they mean taking agile beyond a single team, and asking more teams to join in.

For example, there might be 4 teams working on a NASA spaceship mission to Mars.

NASA decides they want to see if agile can help these teams do better work. So, to start with, the Oxygen team switches from working with traditional Waterfall project management methods to embracing agile principles.

1. Launch team
2. Food team
3. Oxygen team (Agile)
4. Landing team

After a few months, NASA decides that the way the oxygen team is working is going well, so the remaining three teams similarly adopt more agile methodologies:

1. Launch team (Agile)
2. Food team (Agile)
3. Oxygen team (Agile)
4. Landing team (Agile)

Each of these 4 teams are self-organizing, meaning they’re responsible for their own work.

However, now that these teams are all working in the same way, they can be grouped together as a program.

Once you add in the business owners, product management team, systems architect/engineer, and release train engineer, you have all the roles needed to continuously deliver systems or solutions through the Agile Release Train (ART).

What is a program board?

Program Boards are a key output of PI Planning.

Traditionally, they’re a physical board that’s mounted on the wall, with columns drawn up to mark the iterations for the increment, and a row for each team. Teams add sticky notes that describe features they’ll be working on.

• Feature 1
• Feature 2
• Feature 3

Once all the features are added, they work to identify dependencies (features that’ll affect other features) and mark this up by connecting them with red string.

SAFe program boards don’t have to be physical, though. There are a lot of advantages to using a digital program board like Easy Agile Programs, which integrates directly with Jira. We’ll talk more about how you can use Jira for PI Planning towards the end of this guide.

‍

Equip your remote, distributed or co-located teams for success with a digital tool for PI Planning.

Easy Agile Programs

Free Trial

Who is involved in PI Planning?

The success of PI Planning relies heavily on having the right participants actively engaged throughout the event. While every organization may have slight variations, there are several key roles that are essential for effective planning.

Core team members and their responsibilities

Release Train Engineer (RTE)

The Release Train Engineer serves as the primary facilitator and servant leader for the Agile Release Train (ART). Think of them as the conductor of an orchestra, ensuring all parts work in harmony. The RTE's responsibilities extend beyond just running the event – they work to remove impediments, manage risks, and ensure alignment across teams. Before PI Planning, they coordinate with stakeholders to prepare the event. During planning, they facilitate key ceremonies and help teams navigate dependencies. After the event, they track progress and help teams stay on course toward their objectives.

They help:

• Establish and communicate the annual calendars
• Get everything ready (including pre and post-PI Planning meetings)
• Manage risks and dependencies
• Create Program PI Objectives from Team PI Objectives and publish them
• Track progress towards expected goals
• Ensure strategy and execution alignment
• Facilitate System Demos

As the facilitator for the 2-day event, the Release Train Engineer also presents the planning process and expected outcomes for the event, plus facilitates the Management Review and Problem Solving session and retrospective.

Product manager

A Product Manager’s job is to understand the customers’ needs and validate solutions, while understanding and supporting portfolio work.

Before PI Planning happens, Product Managers take part in the pre-PI Planning meeting, where they discuss and define inputs, objectives, and milestones for their next PI Planning events.

In PI Planning, the Product Managers present the Program vision and upcoming milestones. So that they can manage and prioritize the flow of work, they review the Draft plan and describe any changes to the planning and scope based on the Management Review & Problem Solving session. Once the PI Planning event is over, they use the Program Objectives from the Release Train Engineer to update the roadmap.

Following PI Planning, Product Managers play a critical role in communicating findings and creating Solution PI Objectives.

Product owner

The Product Owners are responsible for maintaining and prioritizing the Team Backlog, as well as Iteration Planning. They have content authority to make decisions at the User Story level during PI Planning Team Breakout sessions.

Product Owners help the Team with defining stories, estimating, and sequencing, as well as drafting the Team’s PI Objectives and participating in the Team Confidence Vote. They’re also responsible for conveying visions and goals from upper management to the team, as well as:

• Reporting on key performance metrics
• Evaluating progress, and
• Communicating the status to stakeholders

Scrum master

The Scrum Master is a servant leader to the Product Owner and Development team, which means they manage and lead processes while helping the team in practical ways to get things done.

They facilitate preparation for events (including PI Planning) and prepare System Demos. They help the team estimate their capacity for Iterations, finalize Team PI Objectives, and manage the timebox, dependencies, and ambiguities during Team Breakout sessions. The Scrum Master also participates in the Confidence Vote to help the team reach a consensus.

System architects and technical leaders

These technical leaders provide critical insights about architectural direction and technical constraints. During PI Planning, they present the architectural vision and work with teams to ensure technical alignment. They help teams understand how their work fits into the broader technical landscape and identify potential technical dependencies or risks before they become issues.

Development team members

Developers, testers, and other technical team members are responsible for researching, designing, implementing, testing, maintaining, and managing software systems, and are active participants throughout PI Planning.

During PI Planning, they participate in Breakout sessions to create and refine user stories and acceptance criteria (alongside their Product Owner) and adjust the working plan. Developers help to identify risks and dependencies and to support the team in drafting and finalizing Team PI Objectives, before participating in the Team Confidence Vote. Their hands-on experience is crucial for creating achievable plans and identifying potential risks or challenges.

Business owners and senior executives

Business Owners and executives play a vital role in connecting team activities to business objectives. They typically kick off the event with the business context presentation, helping teams understand market conditions, competitive pressures, and strategic priorities. Throughout planning, they provide valuable feedback during draft plan reviews and help make important trade-off decisions when needed.

Supporting roles and stakeholders

While not always present for the entire event, several other roles provide valuable input during PI Planning:

Customers and end users

When possible, having actual customers participate can provide invaluable direct feedback and help teams better understand user needs. They might participate in specific sessions rather than the entire event.

Subject matter experts

Depending on the domain, various experts might be needed to provide specialized knowledge during planning. This could include security experts, compliance specialists, or domain experts from specific business areas.

Support teams

Representatives from shared services or support teams often participate to ensure their capabilities and constraints are considered in the planning process. This might include UX designers, DevOps teams, or other specialized groups that support multiple teams.

The key to successful participation is ensuring each role understands their responsibilities and comes prepared to contribute. Organizations should provide clear guidance about expectations and necessary preparation work to help all participants make the most of their time during PI Planning.

When is PI Planning held?

Many companies find that 8-12 weeks (which adds up to 4-6 x 2-week iterations) is the right amount of time for an increment.

Some companies hold quarterly PI Planning, for example:

• Q1 PI Planning: December
• Q2 PI Planning: March
• Q3 PI Planning: June
• Q4 PI Planning: September

However, the timing and frequency will depend on how long each program increment is scheduled to last and may need to accommodate holidays.

The good thing about PI Planning events is that they happen regularly on a fixed schedule, which means you can plan for them well ahead of time. That means teams and Business Owners have plenty of notice to ensure they can show up for the event.

This means that what happens in preparation for PI Planning can be just as important as the event itself.

What is a pre-PI Planning event and when is it needed?

A pre-planning event - separate to PI Planning - is to make sure that the ART is aligned within the broader Solution Train before they do PI Planning. It’s all about synchronizing with the other ARTs to ensure the solution and organization are heading in the right direction, together.

You’ll need to organize a pre-PI Planning event if you’re operating at the Large Solution, Portfolio, or Full SAFe levels. Essential SAFe is more basic and does not have a Solution Train, so if you’re operating at this level, you won’t need pre-PI Planning so formally.

Here are a few of the roles that should be invited to the pre-planning event:

• Solution Train Engineer
• Solution Management
• Solution Architect/Engineering
• Solution System Team
• Release Train Engineers
• Product Management
• System Architects/Engineers
• Customers

They’ll look at the top capabilities from the Solution Backlog, Solution Intent, Vision, and Solution Roadmap. It’s really a lot like PI Planning but at a higher level, across the overall solution and not just the individual ART.

The event starts with each ART summing up their previous program increment and accomplishments to set the context. Next, a senior executive will brief the attendees on the current situation before Solution Management discusses the current solution vision and any changes from what was shared previously. Other things that are often discussed or finalized include:

• Roadmaps
• Milestones
• Solution backlogs
• Upcoming PI features from the Program Backlog

How to prepare for PI Planning?

Success in PI Planning starts with thorough preparation. Well before the event, organizations need to focus on both organizational and content readiness. The Release Train Engineer typically leads this preparation effort, working with various stakeholders to ensure everything is in place.

Organizational readiness involves ensuring the right people can participate effectively. This means:

• Setting clear expectations with all participants about their roles and responsibilities during the event. Business owners and stakeholders need to block their calendars and prepare their contributions. Teams need to understand what they'll be expected to deliver during the sessions.
• Arranging appropriate facilities or technical infrastructure for the event. For co-located events, this means securing adequate space for big room planning and team breakouts. For remote events, it means testing collaboration tools and ensuring everyone has proper access. Make sure that the tools you need to facilitate planning are available and working properly. Be sure to test any tech that you are relying on ahead of time (including audio, video, internet connectivity, and access to PI Planning applications), to ensure that your distributed teams can participate in the PI Planning event. Don’t forget to plan for enough food for everyone, too (planning is hungry work).

Content readiness is equally crucial. Here's how each key stakeholder needs to prepare:

• Product Management works on refining the program vision and feature priorities, ensuring they can clearly communicate what needs to be built and why.
• System Architects prepare to share their technical vision and any architectural considerations that will impact planning.
• Business owners gather relevant market and customer insights to share during the business context presentation.
• Teams review their current work and capacity to prepare for planning discussions.

Any presenters will also need to get content ready for their presentations.

What should be included in the PI Planning agenda?

Here’s a standard PI Planning agenda template:

‍

The success of PI Planning heavily depends on careful scheduling and a well-structured agenda. While the standard two-day format provides a framework, understanding the purpose and flow of each session helps teams maximize their planning effectiveness.

Day one: Setting context and initial planning

The first day begins with the business context presentation, typically delivered by senior leadership. This crucial session sets the tone for the entire event, providing teams with insights into market conditions, customer feedback, and organizational priorities that will influence their planning decisions.

Following this, the product vision presentation takes center stage. Product Management shares their roadmap and vision, highlighting key features and priorities for the upcoming program increment. This session helps teams understand not just what they'll be building, but why it matters to customers and the business.

The architecture vision comes next, where technical leaders outline any significant architectural changes or considerations that teams need to account for in their planning. This might include platform updates, security requirements, or technical dependencies that could impact development work.

The afternoon focuses on team breakouts, where individual teams begin their detailed planning work. During these sessions, teams:

• Review their capacity and capabilities
• Begin breaking down features into stories
• Identify initial dependencies with other teams
• Start drafting their plans for the increment

The day concludes with a draft plan review, where teams present their initial thinking to the broader group. This first look helps surface any major conflicts or concerns early in the process.

Day two: Refinement and commitment

The second day begins with planning adjustments based on feedback from day one's draft review. Teams use this time to resolve identified conflicts and refine their plans based on newly discovered dependencies or constraints.

During the morning team breakouts, teams:

• Finalize their feature estimates
• Resolve remaining dependencies
• Complete their team objectives
• Address any identified risks

The afternoon focuses on final plan review and risk assessment. Each team presents their completed plans, now with greater detail and confidence. The group collectively reviews the program board, examining cross-team dependencies and potential risks to delivery.

The day culminates in the confidence vote, where teams indicate their level of confidence in achieving the planned objectives. If confidence is low, teams may need additional time to adjust plans before finalizing commitments.

Keys to successful agenda management

Effective PI Planning requires careful attention to timing and preparation. Organizations should:

• Schedule the event well in advance to ensure key stakeholders can attend. This is especially important for distributed teams who may need to arrange travel or coordinate across time zones.
• Share the agenda and expectations before the event so teams can come prepared. This includes distributing any pre-reading materials or data that teams will need to reference during planning.
• Build in buffer time for unexpected discussions or problem-solving sessions. While it's important to keep to the schedule, some flexibility helps teams address critical issues as they arise.
• Include regular breaks to maintain energy and focus throughout the two days. Big room planning can be intense, and teams need time to process information and recharge.

Remember that while this agenda provides a framework, you may need to adjust it based on your organization's specific needs. Distributed teams, very large ARTs, and other factors might require you to be creative with the schedule. Some sessions may need more time, while others can be shortened. If you have teams in multiple time zones, your PI Planning agenda may need to go over 3-4 days. If it’s your first PI Planning event, try the standard agenda, get feedback from your teams, and experiment with different formats next time.

What happens in the first part of the PI Planning meeting?

The first part of the PI Planning meeting is designed to set the context for the planning that happen next.

Day 1 usually kicks off with a presentation from a Senior Executive or Business Owner. The agenda allows an hour to talk about the current state of the business. They highlight specific customer needs, how the current products address these needs, and potential gaps.

After that, the Product Management team will share the current vision for your product or solution. They’ll talk about any changes that have occurred since the last PI Planning session (usually around 3 months prior). They’ll describe what’s coming up, including milestones and the next 10 features that are planned. This session should take around 1.5 hours.

Why is a confidence vote held at the end of PI Planning?

The confidence vote is a seemingly small but very important part of PI Planning towards the end of the event.

It is important the team is confident in committing to the objectives and work that is planned. The Release Train Engineer will ask teams to vote on this.

Everyone participating in planning needs to vote. This could be via a raise of hands (and fingers) or it could be via the tool you’re using. For example, the Team Planning board in Easy Agile Programs allows each team member to enter their confidence vote.

If the average vote across the room is at least three out of five, the plan is a go-ahead. If it’s less it’ll need reworking (until it reaches a high confidence level). If anyone votes just one or two, they’ll have the chance to share their reasoning.

The confidence vote is all about making sure that the attendees are in alignment and that they agree that the plan in its current form is possible within the given timeframe. Speaking of timing, let’s talk about how and where PI Planning actually fits into your company calendar.

What happens after PI Planning?

After the intensity of PI Planning, the real work of implementing and refining the plans begins. The period immediately following PI Planning is crucial for maintaining momentum and ensuring the plans translate into effective action.

Planning retrospective

Just as teams hold retrospectives after sprints, conducting a thorough retrospective after PI Planning helps improve future planning events. The Release Train Engineer typically facilitates this session, bringing together key participants to reflect on the planning process. Teams discuss:

• What went well
• What went not-so-well
• What could be better for next time

This might include insights about preparation work, team breakout effectiveness, or technical setup for remote participants.

There will also be a discussion of what happens next, which can include things like:

• Transcribing the objectives, user stories, and program board into your work management tool (like Jira)
• Agreeing on meeting times and locations for daily stand-ups and iteration planning

The RTE captures these lessons learned and works with the teams to implement improvements for the next PI Planning event.

Refining and finalizing plans

While teams leave PI Planning with committed objectives, some refinement work often remains. Teams use the days following PI Planning to:

• Fine-tune their story backlogs based on the final agreements made during planning. Product Owners work with their teams to ensure stories are properly groomed and ready for the first iteration.
• Update the program board to reflect any final adjustments made during the confidence vote and closing discussions. The RTE ensures all dependencies are properly documented and visible to affected teams.
• Document and communicate any risks or issues identified during planning that need ongoing monitoring or mitigation.

Integration and alignment

The post-PI Planning period is vital for ensuring all pieces fit together coherently. Teams focus on:

• Synchronizing their iteration plans with other teams they have dependencies with, ensuring their delivery schedules align with the needs of other teams.
• Setting up regular integration points and collaboration mechanisms to maintain alignment throughout the PI.
• Establishing clear communication channels for managing dependencies and sharing progress updates.

Action item follow-through

The success of PI Planning ultimately depends on how well teams follow through on their commitments. Key activities include:

• Assigning owners to action items identified during planning and establishing timelines for completion.
• Setting up tracking mechanisms for cross-team dependencies and risks identified during planning.
• Creating or updating team working agreements to support the new PI objectives.

Ongoing collaboration

As teams begin executing their plans, several mechanisms help maintain alignment:

• Regular sync meetings: Teams with dependencies establish regular touchpoints to stay aligned and address any emerging challenges.
• Program board reviews: The RTE facilitates regular reviews of the program board to ensure dependencies remain on track and identify any needed adjustments.
• Inspect and adapt events: Throughout the PI, teams participate in structured events to review progress, address impediments, and make necessary adjustments to their plans.

Communication and visibility

Maintaining clear communication channels after PI Planning is crucial. Teams should:

• Share finalized plans and objectives with all stakeholders, ensuring everyone understands their commitments and dependencies.
• Establish regular reporting mechanisms to keep stakeholders informed of progress and any significant changes to plans.
• Create visibility around key milestones and integration points to help teams stay focused on their commitments.

The post-PI Planning period sets the tone for the entire Program Increment. By paying careful attention to these activities, organizations can maximize the value of their PI Planning effort and increase their likelihood of achieving their objectives.

The other thing that usually happens after PI Planning events is a post-PI Planning event.

What is a post-PI Planning event?

These are similar to the pre-PI Planning events we looked at earlier. A post-PI Planning event brings together stakeholders from all ARTs within the Solution Train to ensure they’re synchronized and aligned.

Post-PI Planning happens after all the ARTs have completed their PI Planning for the next increment. They present the plans, explain their objectives, and share milestones and expected timelines.

Like PI Planning events, post-PI Planning involves using a planning board, but rather than features, it outlines capabilities, dependencies, and milestones for each iteration and ART. Potential issues and risks are identified, discussed, and either owned, resolved, accepted, or mitigated. And similar to regular PI Planning events, plans go through a confidence vote to ensure they meet the solution’s objectives, and are reworked until the attendees average a vote of 3 or more.

PI Planning in SAFe

If you’re adopting SAFe for the first time, chances are it will start with PI Planning. That’s because it forms the foundation of the Scaled Agile Framework.

As Scaled Agile says, "if you are not doing it, you are not doing SAFe."

SAFe or the Scaled Agile Framework™ is a series of guidelines and practices designed to help bring agility into larger organizations, across all teams and levels of the business. The framework is geared at improving visibility, alignment, and collaboration and should lead to greater productivity, better results, and faster delivery.

Whether you’re adopting all 5 levels or just essential SAFe, the foundation of your transformation and the driver for everything is the PI Planning ceremony.

Scrum and Kanban are also agile frameworks (that you may be more familiar with), and these have historically been very effective at the individual team level. SAFe helps to scale agility across teams; to have multiple teams come together to work on the same products, objectives, and outcomes. It goes beyond the team level to include every stakeholder, outlining what should happen at each level of the organization to ensure that scaled planning is successful.

The purpose of SAFe is to improve the visibility of work and alignment across teams, which will lead to more predictable business results.

This is increasingly important for organizations as they respond to changing circumstances and customer expectations. The traditional waterfall approaches fall short because they’re slow and inefficient.

Bigger companies (often with thousands of developers) can’t keep up with the innovation of smaller, more nimble startups. Along with bigger teams, larger organizations often have stricter requirements around governance and compliance, making it more complex to launch a new feature and deliver new value to customers.

These companies are looking for new ways to organize people into projects and introduce more effective ways of working that use resources more effectively and provide more predictable delivery. If they don’t, they may not survive.

SAFe is a way for these companies to start moving in a more agile direction.

PI Planning is a vital element of SAFe. It’s a ceremony that brings together representatives from every team to help them work together, decide on top features to work on next, identify dependencies, and make a plan for the next Program Increment. As a result, there’s greater visibility across all the teams, changes are made more frequently, and teams work with each other - not against each other. From there, these massive companies can speed up their processes, work more efficiently, compete with newer and more nimble companies, and stay viable.

SAFe and PI Planning are powerful enablers for organizational agility.

While SAFe is a framework designed for larger organizations, there isn't a reason stopping smaller companies from doing a version of PI Planning, too. All you need is more than one agile team to make it worthwhile.

PI Planning in Scrum

You can also use PI Planning as part of a simple Scrum approach.

Scrum Framework diagram shows when and how scrum teams can implement PI Planning

Source: Scrum.org

Scrum is an agile framework that helps teams get things done. It’s a way for teams to plan and organize their own work and tackle user stories and tasks in smaller time boxes. This is often referred to as a sprint.

If multiple scrum teams want to work better together (but aren’t necessarily operating within SAFe), they could adopt a version of PI Planning.

For example, these scrum teams could:

• Meet every 10 weeks and discuss the features they are planning to work on
• Get product managers to combine backlogs and prioritize together
• Share resources across the teams, as needed
• Map dependencies and coordinate joint releases

The good news here is that there’s no “one size fits all” approach to PI Planning, so think about how you could adopt the ideas and principles and make it work for your organization and context.

What is the difference between a PI Roadmap and a Solution Roadmap?

There are different types of roadmaps in SAFe, so it’s important to understand the differences and what each roadmap is meant to do.

PI Roadmap

A PI Roadmap is created before your PI Planning event and also reviewed and updated by Product Management after the event is finished. It will usually cover three Program Increments:

1. The current increment (work that’s committed)
2. The next forecasted increment (planned work based on forecasted objectives)
3. The increment after that (further planned work based on forecasted objectives)

Quarterly PI Planning will outline around 9 months of work. The second and third increments on your PI Roadmap will likely change as priorities shift, but they’re still an important part of the roadmap as they forecast where the product is headed next.

Solution Roadmap

The Solution Roadmap is a longer-term forecasting and planning tool for a specific product or service.

It will usually cover a few years at a time, with more specific details available for year one (like quarterly features and capabilities), and more general information (like objectives) for year two and beyond.

‍

Do you have a key role in PI Planning? See how the right tool can help you manage your release train or program better.

Watch an Easy Agile Programs product demo

‍

Remote or hybrid PI Planning

PI Planning in person was once standard, but with teams more likely to be distributed, gathering everyone at the office isn't always feasible. This doesn't have to be a barrier.

The most important principle is to ensure that the teams who are doing the work are able to be 'present' in the planning in real-time, if not in person.

This may require some adjustments to the agenda and timing of your planning, but with forethought and support from the right technology, your PI Planning will still be effective.

Tips for remote PI Planning

Remote PI Planning is ideal for organizations with distributed teams or flexible work arrangements. It’s also a lot cheaper and less disruptive than flying folks in to do PI Planning every few months. If you have the right tools and technology, you can run PI Planning and allow everyone to participate, whether they’re in the same room or on the other side of the world.

Here are a few tips for remote PI Planning:

Embrace the cloud

Use online shared planning tools to allow your team to access and interact with information as soon as possible - ideally in real-time. Ensuring that all participants have instant access to the information simplifies the process of identifying dependencies and maintaining a centralized point of reference for your planning. This helps prevent errors that arise from working with different versions and transferring data between sources.

Livestream the event

Live-streaming audio and video from the PI Planning event is a viable alternative to in-person planning. Actively encourage your remote team members to use their cameras and microphones during the event. While it may not fully replicate the experience of having them physically present, it does come remarkably close.

Record the PI Planning event

Ideally, everyone will participate in the PI Planning live. But if your teams are distributed across multiple time zones or some team members are ill, it’s a good idea to record the event. Having a recording to refer back to could also be useful for attendees who want a refresher on anything that has been discussed.

Be ready to adapt

Some teams will change the standard PI Planning agenda to fit multiple time zones, which could mean starting the event earlier or later for some, or even running it across 3 days instead of 2.

Set expectations

A common issue that can arise from having distributed teams tune in remotely is too much noise and interference. Before your first session kicks off, communicate about when it’s acceptable to talk and when teams need to use the mute button. That way, your teams will avoid getting distracted, while still ensuring everyone can participate.

For more tips, check out our blog on how to prepare for distributed PI Planning.

Whether distributed or in person, if your team gets PI Planning right, it makes everything in the upcoming increment so much easier.

📣 Hear how PNI media have embraced virtual PI planning

Common PI Planning mistakes

PI Planning doesn’t always run smoothly, especially the first time. And the framework itself may present a challenge to some organizations. Here are some common mistakes and challenges to keep in mind (and avoid):

Long, boring sessions

Avoid starting your PI Planning event with long sessions filled with dense content. Think of creative ways to make these sessions more engaging, or break them into shorter sessions. Consider different formats that help to involve and engage participants. And be sure to make room for team planning and collaboration.

Tech issues

Any event is vulnerable to technical mishaps, but if you’re streaming audio and video to a distributed team, this can really impact the flow of the event. It’s a good idea to carefully test all the equipment and connections ahead of time to minimize potential problems.

Confidence vote

Some PI Planning participants struggle with the confidence vote concept. People may feel pressure from the room to vote for a plan to go ahead, rather than speaking up about their concerns. Failing to address issues early only increases the risk of something going wrong during the increment.

Time constraints

When you have a large ART of 10 or more teams, there are a lot of draft plans to present and review, so less time is allocated to each team. Chances are that the feedback will be of poorer quality than a smaller ART with 8 teams.

Not committing to the process

PI Planning isn’t perfect and neither is SAFe. However, the process has been proven to work for many organizations, when the organization is committed. Start with the full framework as recommended; you can adapt the framework and your PI Planning event to suit your organization, but be sure to commit to the process that follows. Anything that is half-done will not deliver full results.

Sticking with the same old tools

If something is not working, fix it. For example, too many teams stick with traditional SAFe Program Boards even though they’re not always practical. If the post-it notes keep escaping, the data entered into Jira seems incorrect, or you have a distributed team who want a digital way to be part of your PI Planning event… it’s time to upgrade to a digital program board like Easy Agile Programs.

Ready to implement PI Planning in your organization? We've created a checklist to help you get started.

Free PI Planning checklist

Effective PI Planning requires careful coordination. This checklist outlines the essential steps, from pre-planning activities to post-event follow-ups, ensuring nothing gets overlooked.

FREE DOWNLOAD

It includes:

• Event Preparation – Logistics, tools, and content setup
• Pre-PI Planning – Key activities to align stakeholders
• Day 1 & Day 2 Agendas – A structured breakdown of sessions
• Role-Specific Responsibilities – Clear guidelines for each participant
• Remote/Hybrid Considerations – Tips for distributed teams
• Post-PI Planning Actions – Steps to keep momentum going

Download your PI Planning Checklist for free.

Once you have your checklist and process in place, you'll want to consider the right tools to support your PI Planning sessions. We might be biased, but think Easy Agile Programs + Jira is your best bet.

Using Jira for PI Planning

Jira is the most popular project management tool for agile teams, so chances are you're already using it at the team level.

When you need to scale team agility as part of an ART, it can be difficult to properly visualize the work of multiple teams in Jira. The only way you can do that in the native app is by creating a multi-project board, which is rather clunky.

Traditional PI Planning on a physical board using sticky notes and string may achieve planning objectives for co-located teams, but what happens next? After the session is over, the notes and string need to be recreated in Jira for the whole team so that work can be tracked throughout the increment. This is a cumbersome and time-consuming process that is open to error as sticky notes are transcribed incorrectly, or go missing.

The best way to use Jira for PI Planning is to use an app like Easy Agile Programs to help you run your PI Planning sessions. The integrated features mean you can:

• Set up a digital Program Board (no more string and sticky notes!)
• Do cross-team planning
• Visualize and manage cross-team dependencies, create milestones
• Identify scheduling conflicts to mitigate risks
• Get aligned on committed objectives for the Program Increment
• Visualize an Increment Feature Roadmap
• Conduct confidence voting
• Transform Jira from a team-level tool to something that’s useful for the whole ART

Join companies like Bell, Cisco, and Deutsche Bahn who use Jira to do PI Planning with Easy Agile Programs (from the Atlassian Marketplace).

Looking for a PI Planning tool for Jira?

We’ll continue to revisit this guide in the future. If you have any questions about PI Planning or you notice there’s an aspect we haven’t covered yet, send us an email 📫

Do your teams have a clear understanding of what needs to be done – and why?

One of the keys to being agile is to focus on the work that matters. This means working on projects that add value to the business and contribute to performance. But for many organizations, teams can get caught up on the latest feature or development, without understanding how that relates to the bigger picture of what the business cares about.

To keep your team focused on what they have set out to achieve in order to deliver value and achieve business outcomes, setting smart PI Objectives is essential. We look at why they’re so important, what makes a good PI objective, and how you can use them in your organization.

At a glance:

• PI objectives help teams understand how what they’re doing matters to the business.
• Good PI objectives are SMART – specific, measurable, achievable, relevant and timebound.
• Linking features to PI objectives within the same tool makes it easier for teams and stakeholders to see how work is achieving business objectives.

What are PI objectives?

When an agile team gets together for a PI planning session, there are two key outputs:

1. The Program Board (ART Planning Board in SAFe 6.0) covers big picture information such as features, dependencies between teams, and milestones. A feature is an agreed upon piece of work identified as being important to meeting business needs. For software development teams, this might be a new product feature. For marketing teams, it might be a website refresh or an advertising campaign.
2. PI objectives link the scheduled features to broader business objectives and value. This helps align work that needs to be done with broader business goals. They are then broken down into committed and uncommitted objectives.
   1. Committed objectives are those the team is confident they can deliver within the Program Increment. These objectives have been committed by the team through a confidence vote.
   2. Uncommitted objectives are those the team have low confidence in delivering but can help to build a buffer into the PI. This is because while the outcome of these objectives may not be certain, they are included in the teams capacity and plan for the PI should capacity remain after delivering on committed objectives.

The benefits of having smart PI objectives

PI objectives link what teams are working on to what the business cares about. They create alignment with business objectives by clearly connecting features to business value. As a result, teams know how their work is adding value.

Smart PI objectives provide a framework for this. They help build trust, create a shared language, and provide a clear direction. Everyone in the team can then understand what they’re doing, why they’re doing it, and why it’s important.

Without smart PI objectives in place, teams can spend time on tasks that aren’t adding value to the business and impact agility.

PI objectives are essential to your ability to measure success. Completing features alone isn't enough - they must drive a business outcome. They help get teams clear on why the work they do matters and define what success looks like.

What makes a good PI objective?

We’ve talked about why PI objectives are so critical, and now we’ll explain what makes a good PI objective.

Good PI objectives:

• Allow the business to see deliverables in a set timeframe
• Provide clarity on how scheduled work  fits into the big picture
• Enhance communication between teams and stakeholders
• Include no more than 7 to 10 objectives in total
• Aligns with what the business cares about
• Are clear on why it’s important and what it will deliver
• Are understood by anyone who picks them up

Are SMART – that is, specific, measurable, achievable, relevant and timebound

PI objectives need to be SMART

Using the SMART goal-setting framework to write your PI objectives helps keep your objectives clear and concise. Under this framework, your PI objective needs to be:

• Specific – Clearly and explicitly state the intended outcome of your objective.
• Measurable – Describe what your team needs to do to achieve the objective and how they will quantify success. Stakeholder feedback should form part of this.
• Achievable – Ensure the objective is realistic and within your team’s control and influence.
• Relevant – Align the objective with overall business objectives.
• Timebound – Set an appropriate timeframe to achieve the objective within the PI.

Team PI objectiveEnsure Easy Agile server customers have a seamless option to migrate to cloud by implementing JCMA and site import/export by the end of Q3.

Tips for writing SMART (and smart) PI objectives

Typically, many teams will run PI planning sessions in one tool, and then use another tool (like Confluence) to record PI objectives.

But separating PI objectives from the planning sessions makes it hard for the team and stakeholders to see how the work is shifting the dial for the business.

With the Easy Agile Programs, you can directly link your features to your objectives within the same tool. You're also able to describe the objective within Easy Agile Programs and assign business value:

By connecting features to PI objectives within the same tool, teams and business stakeholders gain clear visibility of work. They can see how their work is helping to achieve business objectives.

Learn more

Using the SMART framework to define PI objectives helps your teams focus on the right work. They align projects with broader business goals while providing a shared understanding across teams. By working towards the same purpose, they help keep your teams and organization productive and agile.

You can with Easy Agile Programs

Ready to bring your PI Objectives into Jira?

Watch Demo